| Number | Model | YH-506 |
| 1 | Function | Gluing and pressing cutting → Fine trimming → Scraping → Buffing |
| 2 | Panel width (min) | 50 mm |
| 3 | Feeding speed | 16 M/min |
| 4 | Workpiece thickness | 10-60mm |
| 5 | Bandwidth | 12-65mm |
| 6 | Band thickness | 0.4-3mm |
| 7 | Pneumatic pressure | 0.6 MPa |
| 8 | Machine size | 4200*850*1500mm |
| 9 | power | 10 KW |
| 10 | Machine weight | 1000 KG |
| 11 | Touch Screen | DELTA |
| 12 | PLC | DELTA |
| 13 | Cylinder | EASUN & AiATC |
| 14 | Electromagnetic valve | EASUN & AiATC |
| 15 | End Cutting Guide | HINHIWIN |
| 16 | Pressure regulating valve | ENSUN |
| 17 | Motor | CC |
Function: Gluing and pressing → Endcutting → Fine trimming → Scraping → Buffing
Place the edge tape on the board and press tightly. Taiwan DELTA controller system.
Cut off the excess sealing strip before and after the sealing edge so that the sealing strip is flush with the end face of the plate.
Fine trimming
Trimming is a function that includes rough trimming, fine trimming, copy trimming, and scraping. Its function is to trim the edge band around the plate that is higher than the plate surface so that the edge of the plate is smooth and excessive, to achieve the purpose of beautification.
Polishing: Polishing the cloth wheel with soft materials to throw out the gloss of the working surface to achieve better results.
The product is very good.
Matching the panel production line, after the panel is processed by the nesting machine, then using the edge banding machine to seal the edge.
