| NO. | Description | Parameter |
| 1 | XYZ working area | 2000*3000*200mm, 6*10ft |
| 2 | Optional working area | 1300*2500*200mm, 4*8 ft 1500*3000*200mm, 5*10ft 2000*4000*200mm, 6*13ft |
| 3 | Guide | Original TAIWAN HIWIN |
| 4 | Z Structure | Original TAIWAN TBI Ball Screw transmission |
| 5 | Traveling Positioning Accuracy | ±0.02/300 mm |
| 6 | Repositioning Positioning Accuracy | ±0.02 |
| 7 | Table | Aluminum profile table/vacuum table plus T-slot |
| 8 | Vacuum pump | 7.5 KW Taiwan EUROVAC vacuum pump |
| 9 | Max. Speed | 35000 mm/min |
| 10 | Max. Working Speed | 25000 mm/min |
| 11 | Spindle Power Motor | 9KW air-cooling ATC Spindle |
| 12 | Spindle Speed | 24000 RPM |
| 13 | Drive Mode | leadshine servo motors and drivers |
| 14 | Lubrication system | Automatic lubrication system |
| 14 | Working Voltage | 380V/50Hz/3 phases |
| 16 | Operating System | LNC MW2200 |
| 17 | Tool change type | Rotary-type knife library |
| 18 | Tool magazine motor | MIGE servo motors and drives |
| 19 | Magazine capacity | 8 positions ATC |
| 20 | Collet | ER32 |
| 21 | Software | Type3/Artcam |
| 22 | Dust cleaning system | Spindle cover + dust collector + pipe + bags |
Air-Cooled Spindle
The air-cooled spindle is suitable for a variety of processing scenarios due to its simplicity, convenience, and low cost. The maintenance of the air-cooled spindle is relatively simple, and it mainly requires regular cleaning of the fan and heat dissipation channel to ensure good air flow.
Working Table
The ATC CNC engraving machine is equipped with a multi-zone vacuum adsorption system that can quickly fix materials without complicated clamps or fixtures. This design not only simplifies the desktop layout but also improves processing efficiency. The desktop size can be customized according to customer needs to accommodate processing tasks of different sizes.
HIWIN Rails
Youhaocnc CNC routers use HWIN rails. The rails can achieve high-precision linear motion in the xyz linear direction under high load.
Toolsensor
Wood routers can add automatic tool setting blocks. It depends on the customer’s needs. The main function is to adjust the tool adjustment time after a tool change.
Linear-type tool change
With an independent tool magazine, it can automatically replace the required tools during the processing of the workpiece without stopping the work.